Author Archives: toolsve
Author Archives: toolsve
Attaining precision while you cut through logs for your DIY project is something you can’t compromise with. Using a regular miter saw for angular cuts may help you slice straight through the wood, but the tilted cuts won’t be of any use.
Choosing a sliding miter saw for such works can make a huge difference in the output. It’s a must-have tool for the professional tool guys and for even DIY enthusiasts, as well. To help you out in finding the best sliding compound miter saw, we have listed down 3 of the most functional devices.
Keep reading till the end to find out the one you need!
A compound miter saw is a special type of saw that simply cuts more than just angles. These saws come with an arm that makes the blade to be tilted to either side and provide a bevel cut.
As the blade comes with a tilted angle and it can cut two different angles at the same time, the machine is, and therefore, also known as a compound saw.
There are a number of benefits you can get from a sliding compound miter saw. Here are some for your consideration.
The most common benefit you get is the precision in cutting the log. You can angle, tilt, and position the blade at the right place that you need for the precise cut you want. This is not possible with a standard cutting saw.
For a sliding miter saw, it’s easy for the blade to move forward and backward and achieve a greater cutting length – more than the diameter measurement of the blade.
Coming with a comfortable handle, you can easily put a minimum effort to cut the log deep enough. Just pull the handle down, and it goes straight through the logs like a hot knife in the butter.
When you talk about power tools, it’s tough not to mention Dewalt. They have been producing top-quality sliding miter saws for decades that every tool man absolutely loves.
The DWS779 is yet another signature power tool from the house of Dewalt with a state-of-the-art functional design. Its razor-sharp 12-inch blade can cut through timber as thick as 6.75 inches. That’s more than half of a foot in depth.
To make the cut smoother, like a knife in the butter, the DWS779 has a powerful motor inside. It allows the blade to rotate at an impressive 3800 RPM rate. Being a slider saw, you don’t need to push the blades through the wood; it will melt the timber in seconds.
The only thing you may worry about while working with a miter saw is that it gets all dusty. But having the DWS779 in your garage means less mess than you expect. It comes with an efficient dust collection system that can collect about two-third of the dust generated while you work.
Try this one if you’re just about to start using a miter saw. It’s totally newbie-friendly.
Up next, we have the Hitachi C10FCG miter saw on our list. This single-bevel compound saw is definitely one of the best if portability is the prime concern.
That’s because this 24-pound machine can be easily carried and shifted with less physical effort spent. This is quite tough for most of the mainstream devices we generally find in the market. Being a single bevel miter saw, the machine tilts from 0 to 45-degree angle towards the left side with absolute precision.
Angling the blade in a different direction is as smooth as it could get. Try the measurement from 0 to 52 degrees of miter angles to get the perfect cut on the timber. Simply slide out the blade and make a quick cut in seconds.
The C10FCG comes with a surprisingly powerful motor inside. This 15 Amp motor can generate a staggering rotation of 5000 RPM at max. That’s going to add a lot of pressure on the wood to let you have the perfect slice ever!
Making a dusty mess isn’t fun. That’s why the machine comes with a dust collector attachment that takes care of most of the dust produced during the cutting process.
If you’re frequently working with heavy logs, this one may suit you the best. Given that the RPM reaches 5000, it’s totally going to be of great use for you.
Looking for the perfect cut with unparalleled precision? Own the Bosch Power Tools GCM12SD now! Its patented Axial-Glide system allows you to cut wider cross-cuts with precise alignment.
It saves a lot of space for its compact and sleek design. You get to save more than 12 inches of space on the cutting table, getting the exact service that a functional sliding miter saw provides.
The GCM12SD saw comes with a 14-inch expanded horizontal slicing, coupled with a six and a half-inch vertical cutting. Also, you get a six and a half-inch crown cutting capacity with a 45-degree spring angle.
Holding the handle of a miter saw means fatigue for some users. That’s because of the faulty design and uncomfortable grip that the machine-handle comes with. But not in the case of the Bosch GCM12SD.
It has a soft-grip trigger that lets you hold on to the handle with excellent comfort. Bring it down and slide it open – the grip ensures maximum comfort and safety for your hands.
In the case of collecting waste dust, the GCM12SD makes the best move in the miter tool industry. The device can collect almost 90 percent of the total dust produced while you slice through timbers. So expect anything but dust to bother you with when you have the GCM12SD in your hands.
Try this if your prime target is accuracy and precision. Its patented gliding system makes sure you don’t miss out on any angle you want.
So, you are going to get a compound miter saw, right? But before you hop in for the final decision, here are some pro tips for you. Make sure you follow these tips before you spend your bucks on a saw.
The major part of a miter saw is the blade. It’s like the core of the entire machine. The more powerful the blade, the easier it is to have the perfect cut you desire. For most of the products in the market, the blade size may be 10-inches or 12-inches.
But the actual range can vary from 7-1/4 inches to 12 inches max. Depending on what project you are planning on, you need to choose the blade type. The rule of thumb here is that the larger diameter the blade comes with, the thicker it cuts through.
An average user will be satisfied with a 10-inch blade, for sure. Any DIY task or sudden repair may not demand more than that. But a professional tool guy would be longing for a 12-inch masterpiece.
With a higher diameter of the blade, you may cut through as deep as 7 inches of a wood log. But this depends on how wide you can open the blade, too. If the blade can’t be raised much, there’s no chance you can dig deeper than 6 inches.
The precision depends on the tooth-count, as well. The more the tooth, the better cut you can expect. Usually, 12-inch blades do come with the maxim tooth-count that ensures a proper cut every single time.
If you think the blade diameter is the only thing you need for a deep cut, you don’t have any idea about how sliding rails work. When you’re going for a miter slider saw, it comes with a slider in front of the fence.
The blade slides forward and backward through the slider and allows the blade to cut through more than it can originally do. Many top-class slider saws can go for a 16-inch long cut with its 12-inch diameter blade.
That’s not all; a blade with a 7-1/4 inches diameter can slice through 2X8 with a proper smooth railing system. That’s the reason a buttery-smooth railing system is important. As you’re going for a miter slider saw, check if the slider works perfectly.
All the charisma of the blade depends on how powerful the motor inside the machine is. You can’t expect the blade to perform at its best if you’re running it with a 5 Amp motor that allows the blade a highest of 1000 RPM, right?
What you will be looking for is a machine that is powered by at least a 15-Amp motor that can turn the blade at a minimum of 3500 RPM. Above this level, it’s up to you how strong you want the machine to perform.
Trust us, cutting through timber, especially if you are working for a whole day, is going to get messy. You need to expect a huge amount of wood dust that sprints out of the timber that goes under the saw blade.
It’s clearly up to you how you would want to clean up the mess unless the machine itself comes with a dust collecting attachment. There are several top brands in the market that come with such products with dust collecting attachment.
Depending on the model you are considering, the collectors can collect around 75% to 90% of dust produced quite efficiently and without a mess. Make sure you are bidding for the most efficient one to save you from additional clean-up headaches.
What makes a miter sliding saw any different than other typical ones? It’s the precision in the measurement that you get. Such devices come with clearly marked measurements to find the right angle you need.
But it’s not that all the saw machines you get would have perfectly drawn measuring marks. You need to pay extra attention to it. Make sure the marking is as precise as it can get.
Fencing makes sure that the log you’re trying cut through is well placed and doesn’t slip. Proper fencing is quite crucial for accurate cutting. Imagine the log trembles while the blade is slicing through it – nothing could get messier, can it?
Lastly, if it is possible, try to make a move towards a lighter device. It’s obvious that the machine would need frequent movement here and there. It’s not that you’re going to fix it in your back garage and keep it there forever.
If you’re going to use a heavy device, it will be a tough time for you to move it outside the workstation. So, it’s better to switch to a lighter one.
Q1. Can a slider compound saw cut a straight cut?
Ans. Yes. If you set the cutting measurement at 90-degrees, the machine will provide a straight cut in the wood.
Q2. Should you push the blade or pull?
Ans. Sliding miter saws are designed in such a way that you need to push the blade through the wood for an accurate cut.
Q3. Is there a difference between the table saw and miter saw?
Ans. Yes. A table saw can only cut straight, while a miter saw can cut both at a straight and angular position.
Now that you’ve got a clear idea of what could be the best sliding compound miter saw from our reviews, it’s time you made your move. Remember, have zero-tolerance when you choose the blade size, slider functionality, and especially the motor power. Choosing the most useful one shouldn’t be that difficult if you can follow the buying guide we have put here. Keep that in mind and find out the best-suited one for your next project!
Your garage is not complete without the best miter saw stand. And, learning it the hard way can be a disaster for some projects. So before you realize that you have ruined your work just for missing a few centimeters, read this review thoroughly and get the best stand out here.
We are recommending three top-notch products here. However, if you don’t like them, you can always scroll down to our buying guide and have some tips on how to find the best saw stand.
Here are the three products that are currently leading the discussed market segment.
The TB-S600 has all the features that any other saw stand should have. The only difference is that it outperforms almost in everything. And we are gonna show you how. However, the drawbacks of this machine will also be mentioned in the review.
Yes, it is foldable, and the wheel design makes it easily portable. There is a foot lock to fix the folded and unfolded position in place. The 2.4-inch boxed tube structure gives the stand a low weight while maintaining a tough reputation. Hence, it weighs just over 60 pounds.
It has two positions when opened. In the lower position, it will have a dimension of 57.6” x 28.15” x 34.84,” and in the higher position it will have a dimension of 124.02” x 28.15” x 38.07”. Moreover, you can comfortably fold that into a 5 feet long cart, which can also carry your saw.
Speaking of carts, it has an 8.8” wheel made with solid rubber. This wheel and the other two legs of the stand prevent it from wobbling so that you can have a comfortable sawing. The clams will lock everything in place.
In previous Tough Build products, we have seen a tendency of clamps to loosen over time. So that is a big drawback.
Other than this, there are several other perks to have this stand. There is a spare parts tray. You will also have 10-inch work support along with the 10 feet material support extension. It also features quick-release tool mounts that allow saw to be used off the stands.
Manufactures made it best for the money. This is a kind of tool that every DIY warrior would like to see in his garage.
The main three materials of this tool were aluminum, steel, and plastic. Like all other effective stands, it also has two extendable arms. But it also features an aluminum roller on one and a flat top on the other.
Without an extension, the base is 108 centimeters, and with the extension, it is about 258 centimeters. But like every other good carpenter, you can comfortably place longer materials on this stand. Moreover, you can adjust everything with easy brackets.
However, the base will wobble a little. So you need to press down and adjust the height accordingly.
The right-hand side of the base has two wing nuts that adjust the panel behind the top plate, which acts as a stop block. Nevertheless, never take this plate as a permanent measurement as it can wobble and can create millimeters of difference.
There is a wheel for easy portability. Although, I would have been a lot happier if it was entirely made of rubber. Plastic is not the best material for wheels.
To mount the saw, you just need to place the saw on the base aligning it with the baseline and flip the black lever on the left-hand side. Yes, it’s that easy that I can finish writing the process in one line.
A 13-millimeter half-inch socket wrench, which is conveniently placed in the bod of the stand. You will also have bolts in the package. The mounting brackets have rubber underneath them so that you can easily place that firmly on any other surface. Furthermore, the legs are highly adjustable here.
This is another marvel from Powertec. Manufacturers of this product tried to keep the least cost while maintaining the quality they are reputed for. And thus you have one of the best miter saw stand.
The MT4000 will accommodate 10” to 12” miter saws. When it is retracted, it will measure up to 46 inches, and when it is extended, it will be a little over 79 inches. And all of this comes in a steel stubbing construction on four locking steel construction.
Although its net weights are just about 40 lbs, it has a capacity to hold nearly 330 lbs. Miter saws, as well as any other version of tabletop saws, will be compatible with this table. And just about everything in this table is adjustable. That also includes the legs, which are a big plus for any tool table.
But the part we liked most was the outlets. It has three 125V AC outlets, which has an input amperage of 15 Amps.
For any tool table, wheels are one of the most important things. And this table has a nice set of wheels for itself. They are 8-inch rubber wheels that have great friction to any kind of surface, giving you the best stability for sawing. There are also 11.5” rollers that make handling the wood very easy.
The locks are amazing here. They keep the wobbling to a minimum. However, it is not yet perfect.
It is not entirely uncommon for our readers to disagree with us. If may or may not like the products for various reasons such as price and customer service of the brand. That’s why we have prepared a buying guide here so that you can find your best match in the market.
If a carpenter asks one thing to a saw stand, it will be sturdiness. Because that is the whole point of buying a table in the first place
However, a stand will not be 100% when it comes to firmness. You just have to make sure that it has the best value for your money. To do that, make sure that the legs are adjustable. You also want the clamps and locks to be tighter. If the adjustable parts are square, there is a high chance of it being wobbling. So go for a circular one.
If you are a professional, portability could be our biggest concern. That’s why you need a stand, which is light and has wheels. It should also be easily foldable. And wheels, as well as handles, are always a big help.
Not every stand has wheels. So if yours has a set then it should be of rubber. 100% rugged rubber ensures the best traction and durability. It also facilitates the firmness of the table. The width of the wheels should also be larger to prevent the table tilting of as it has a higher center of gravity.
You are getting a table for your saw. There is no point in purchasing a table that will not go with your saw. So double-check the measurements of your table and saw. Nevertheless, you should prefer buying the table from the same company you bought the saw.
Capacity is a part of compatibility. Your table should be able to bear the weight of your miter saw plus the wood you are going to cut. This is the basic equation. However, don’t take one that has a capacity below 300lbs.
Stainless steel is always the best option for a sturdy construction. However, that also drives up the price. So, aluminum and plastic can also be used in necessary places.
No matter what the retracted size of the arms is, the extracted size should be at least 5 feet. The larger, the better. We prefer a length of 10 feet. Rollers in one of the arms are highly cherished. The stop plate is also helpful when cutting boards of wood.
This is the special feature stand makers adding to their creation nowadays. Make sure that the volt requirements are compatible with your outlets.
You will need tools to assemble the stand. Make sure you don’t have to buy those tools. Because that will be an unnecessary expenditure that a lot of other products don’t have.
That was about everything you need to know to find the best miter saw stand in the market. You may have your personal preferences. But that won’t be much different than what we had recommended here.
Before leaving! Did you see what just happen….?
I saw a saw to saw with a saw.
For reading another full review Click Here
For any professional in the construction industry, a tile saw is one of the few tools that can’t be ignored. As our expectation from modern and personalized houses is always evolving, having the best tile saw is getting more and more critical.
So, without further ado, let’s find out why and how these five tile saws are the best deals in the market.
In this section, we will describe the top 5 best tile saws that come with unbeatable performance and quality.
If you are searching for the lightest wet tile saw to bring around your yard, then the DEWALT D24000S certainly deserves some keen attention. The tile cutter unit comes with a ten-inch long durable and sharp blade.
When it comes to the cutting capacity, the industrial quality wet tile saw can slice off 18×18 inches of tile easily. You can rip cut tiles 25 inches to 28 inches with a single pass with this saw.
For upholding a perfect alignment while cutting tiles, the DEWALT line is made of rigid aluminum frame and arm. Nonetheless, it’s entirely possible to cut in a 45-degree angle using the power of the integrated beveling.
To enrich the cutting experience, the tile saw is built with a 1.5 HP motor that needs 120 AC volts to operate. The motor can generate enough energy to cut porcelain, ceramic, marble, or glass tiles.
Maintaining cleanliness in the tile saw workstation will be much more comfortable with the side and rear water extensions. Those extensions will drive back the water to the tub that collects used water.
Fortunately, the whole unit only weighs 69 lbs. So, transportation from the site to the site won’t be a big concern to worry about.
After having all of those extensive features, it also has storage options for extensions, a blade wrench, a hex wrench, and a complete miter guide.
Our second pick, the SKIL 3540-02 tabletop tile saw, is for the people who want to tackle home renovation on their own. The DIY tile saw is powered with a 4.2 Amp motor and requires only 120 AC voltages to operate.
We found it’s 7-inch blade a bit small as it’s was primarily made for DIY warriors. However, you can cut tiles from 0 to 45 degrees of angle.
It is possible to cut up to 12×12 inches of tiles with the mini tile saw. Even while dealing with materials like stone or masonry, it can perform well with its powerful motor.
In the case of cross-cut jobs, its cutting capacity is 7.75 inches long. On the contrary, the maximum capacity of diagonal cuts is 7.25 inches. The stock blade is coated with diamond powder to boost up all types of operations.
Furthermore, the top of the tile saw is manufactured with stainless steel that resists corrosion. There is an attached water reservoir, which helps keep the blade cold and also keeps the dust and debris away.
The tile saw also includes an adjustable rip fence and miter gauge. A combination of these two allows you to cut tiles with professional-level accuracy.
SKIL 3550-02 is the upgraded version of the SKIL 3540-02 model. Therein, SKIL elevated the tile saw motor to 5 amps, although it can still be operated with 120 AC volts of current supply, which are common to households.
It has an adjustable 7-inch blade that is diamond powder coated. It can cut both wet and dry tiles. You will get the flexibility to slit tiles in 0-degree, 22.5-degree and also in typical 45 degrees.
The exclusive Hydra Lock System will hang on to the water just beside the blade. As a result, the blade will stay cool and require less clean-up time.
Unlike the earlier one, the tile cutting machine has an aluminum-made tabletop. So, neither you need to worry about rust nor durability. Impressive, huh?
It’s capable of holding up to 18×18 inches of tiles with the sliding side extension. Nonetheless, the cutting will be accurate every time with the support of an adjustable rip fence and miter gauge.
The complete unit has a dimension of 26x20x12 inches, and it weighs only 27 lbs. Hence, it can be stored in any small place and easily maneuvered.
In any sense, it is the most potent and the best tile saw for the money for DIY workers.
The 2 in 1 industrial saw added with the best tile saw blade that can split both bricks and tiles. Its diamond power coated 10 inches of the blade can tear apart rigid pieces of stuff just like butter.
With the power of 2.5 HP, dual capacitor, and 15 amp motor, it can generate enough energy to handle big projects. Now, you don’t even need to worry about the motor health anymore. The thermal power will ensure its safety with 100% assurance.
To get versatile cutting support, the head of the tile saw lets you pivot the cutting results in both 22.5-degree and 45-degree. Also, you can change the blade position for different types of shapes of tiles and bricks. It enables you to cut off up to three and a half inches thick materials like stone, marble, granite, etc.
For ensuring a smooth gliding of tiles, there is a linear bar system attachment with this industrial tile saw. On the other hand, the saw frame is made of stainless steel that can tolerate inevitable harsh movements and corrosion.
The co-related water pump of the tile saw makes sure to cool down the blade while going through excessive operations. Concurrently, it can use 3 gallons of water per minute to avoid the overheating problems and to keep the ripped materials clean. There is also an ABS water tub to store the dirty water after cleaning.
And finally, here we are with our last recommendation on the list. The 650XT edition of QEP is entirely different from others due to the 3/4 HP motor. It powers the tile saw to automatically glide strong materials like ceramic, marble, slate, granite, and even porcelain through its 7-inch blade.
While operating with 120 volts, it can generate a rotational speed of 3600 RPM via the 4.8 amp motor. With the 16mm arbor support, the tile saw can be used for unlimited rip and diagonal cuts of tiles.
There is an extension table with 8 inches of diameter to uphold larger tiles while doing cutting operations. To get both 22.5 and 45 degrees of cutting angles, the implanted tilt-up table will play a quite supportive role.
It has an adjustable lock feature and tile rip guides to provide cuts with accuracy. Overall features will allow you to cut tiles between 1/4 to 1 inches of thickness.
The innovative and unique water baffle system enables minimizing water spray while reducing refill numbers. For ensuring easy portability, the manufacturer kept the tile saw at only 23 lbs. with a dimension of 20×15-3/4×9-7/8 inches.
Maybe, you are a DIY lover or a full-stack professional. In both cases, the below instructions will help you to pick the wildest tile saw from the market.
The motor is the core of a tile saw that determines the rotational force or frequency of the blade and enhanced overall performances of other features. While taking a look into the motor specification, you have to consider max amperage, the requirement of voltage, Horsepower, etc.
For DIY projects, 15-amp is more than enough. We recommend you pick something that has a minimum of 2.5 HP and 120-volt operative support.
Well, the blade is the major concern when you want to buy a tile saw. Consider the blade size, depending on the type of projects you are going to hang out with. But at least, a 7-inch blade is essential for cutting tiles while consuming less time. Also, make sure to get a tile saw that can cut off of 1-inch thick tiles.
A blade that is manufactured with a diamond powder coat will also increase durability. Identify whether the one you are hovering on has 22.5 and 45 degrees of angle cut support or not.
Don’t let your ear listen to any shout out about a tile saw that is made of backdated frame quality. Our votes always go towards aluminum or stainless steel frames. The reason behind that is pretty specific. This type of frame can resist corrosion or harsh scratch for a long time.
In general, a water system helps to keep the blade doused in water to avoid overheating. When your cutting machine is operating for a long time, it’s crucial to make it cool down to ignore blade bending related problems.
Moreover, a water tub would be mandatory to drive the dirty water back after cleaning the blade from dust and debris.
With a side extension, a tile saw can uphold large sizes of tiles in the correct position, even so, doing a consistent performance. Furthermore, a miter guide will determine the exact cutting measurements of the tiles. Therefore, make sure to pick a tile saw that has both of the features.
Here are some of the common question that we get all the time
Answer: A tile saw that comes with a water pump that allows the machine to keep the blade cool is a wet tile saw. Wet tile saws are essential when you are dealing with dense or hard tiles.
Answer: Unlike regular tile saw blade, this type of blade has a diamond fixed on the edge of the body. It can tear apart concrete, bricks, stones, masonry while consuming less time and machinery effort. Besides, this type of tile saw blade can be untouched by rust and last for years.
Answer: Well, it depends on the one you have or going to purchase. Tile saws from manufacturers like QEP, SKIL, and DEWALT have the capacity to cut granite too. The above 5 tile saws we have discussed are the best of them.
Answer: The QEP 22650Q 650XT, SKIL 3550-02, SKIL 3540-02, and DEWALT D24000S are the best tile saw that can be operated with 120 AC volts.
Answer: We emphasize on at least having 7 inches of a tile saw blade as it is necessary for cutting tiles within less time. Remember, the size of the blade also effects on the limit of the tile rip cut and diagonal cut.
Just like always, we have given you the five best products in the market. The five in-depth reviews above regarding the best tile saw represented their impressive durability, incomparable built-in quality, and great performance. Most importantly, all of these are good for the money.
We tried our best. We hope you will be benefited.
For more details click here